Rhino Pitcher Rinser Actuator Star
replacement part
Replacement Actuator Star for Rhino Spinjet Pitcher Rinser. Compatible with the following models:
- RHPR-300-S
- RHPR-600-S
Hex Rinser grate and other spareparts for the SpinJet can be found here.
Brand New Actuator Star
Our round rod design means no milk sit on the actuator plate. Genius. Other rinsers the milk will sit on top of the plate and contaminate your pitchers or brewing vessels. It's also bigger. This means it takes a 32oz/1 litre pitcher no problem. Also 6 cup Chemex rinsers with ease.
It is also reccomended to add a Rhino Spinjet Valve Gasket Kit the most common issue is a leaking valve and it's better to have a replacement valve on site so your business does not get interrupted.
Food grade lubricant is another essential that you need to keep the valves lubricated.
We strongly reccomend placing a water filter between your tap and the spinjet input. This will keep things running smoothly, reducing limescale and calcium deposits so the rinser and the pitchers will also stay more shiny with less effort. A filter will also reduce the pressure.
The Maximum recommended working pressure of 2.4bar (35psi) and a flow rate 120lp/h approx. If you have high water pressure then you will need to install a Pressure Reducing Valve
We have sold over 100 units to a variety of HoReCa so we have the experience from panicking business owners when a leak appears or the rinser doesn't stop spraying. We are aware off the most occuring issues. So please take our advice serious. You will thank us later!
We also supply a lot of knock box chutes to build into your bar. Make sure to contact us in time (items do get sold out) so we can advice you on your bar set up and all the supplies you need.